headline: S Series forklift

Lift capacities from 6,000-12,000 lbs

S Series General Features
The Sellick design team engineered the S Series to maximize operator comfort and fork visibility optimizing productivity and safety.

The roomy operator compartment was fully designed as an operator comfort zone. The zone’s ergonomically-minded features include tilt steering, fully-adjustable suspension seat, easy-to-read gauges and indicator lights, cup holder & coat hook. The isolated operator’s compartment sits on rubber mounts which dampen engine vibration & noise. Access to the comfort zone was improved by widening the doorways, removing obstructions & improving the safety steps on both sides of the forklift.

The comfort zone is also a safe zone with optimum operator visibility, retractable seatbelt, halogen work lights & backup lights, backup alarm & neutral safety start.

The S Series forklift features a Perkins Tier II 2004 EPA-compliant low emission, low noise diesel engine. All models are available with four wheel drive.

All S Series forklifts are equipped with Sellick's SEE-THRU© hi-visibility two-stage or three-stage mast assemblies. Sideshifting is standard and a wide range of carriages, forks and attachments are available.

Sellick offers a wide variety of hook, shaft, & rotating carriages, forks & attachments to customize your S lift truck for your job application.

Standard equipment

  • Sideshift
     
  • Full instrumentation & indicators
     
  • Fully adjustable suspension seat
     
  • Tilt steering column
     
  • Load sense power steering
     
  • Halogen lighting package includes adjustable headlights & backup lights
     
  • Safety lighting includes LED brake lights & amber warning light
     
  • Retractable seatbelt
     
  • FOPS operator platform
     
  • Neutral safety start
     
  • Power assisted enclosed wet disc brakes
     
  • Parking brake with ergonomically-designed handle
     
  • Backup alarm
     
  • Engine pre-cleaner
     
  • Engine fuel/water separator

Detailed shots of S Series mast, hood, overhead guard, counterweight & steering console

Optional equipment

 
  • Fully enclosed cab with lockable doors, tinted glass, front wiper & washer & interior light
     
  • Four wheel drive
     
  • Autoshift (powershift) transmission
     
  • Air-conditioning - factory-installed
     
  • Load backrest
     
  • Turn signals
     
  • Poultry package with rotating carriage and special lighting package
     
  • Variety of shaft, hook & fork positioning carriages available
     
  • Wide variety of shaft, hook & pallet forks available
    •

 

S Series line art

 
S Series Dimensional Data & Technical Specifications
S Series S60 S80 S100 S120
  Lift capacity @ 24 inches 6,000 lbs
2,722 kg		 8,000 lbs
3,629 kg		 10,000 lbs
4,536 kg		 12,000 lbs
5,443 kg

A

 Overall length (without forks) 148"/3,760 mm 149"/3,785 mm 151"/3,835 mm 158"/4,013 mm

B

 Overall width

89"/2,261 mm

C

 Wheelbase

89"/2,261 mm

D

 Height to top of overhead guard (std)

96"/2,438 mm

E

 Distance from seat to overhead guard (std)

43"/1,092 mm

 

 Outside turning radius

178"/4,521 mm

183"/4,648 mm

 

 Aisle width 90° stacking

266"/6,756 mm

271"/6,883 mm

G

 Frame underclearance

15"/381 mm

H

 Mast underclearance

12"/305 mm
  Mast sideshift

6"/152 mm

J

 Mast tilt - forward

45°

K

 Mast tilt - rearward

12°

 

 Lift speed - average (2-stage mast) 1.7 fps/0.5 mps 1.7 fps/0.5 mps 1.2 fps/0.4 mps 1.2 fps/0.4 mps

 

 Travel speed (standard) 19 mph 19 mph 19 mph 12 mph

 

 Gradeability

25%

 

 Tire type & size (standard)

Drive (pneumatic) 15.5 x 25
Steer (pneumatic) 14 x 17.5

 

 Engine manufacturer & model

Perkins 1100 Series (1104C-44) diesel naturally-aspirated

 

 Cylinders

4

 

 Engine output (gross power)

83 hp @ 2200 rpm

 

 Peak torque

223 ft-lbs @ 1400 rpm

 

 Transmission manufacturer & type

International Transmission Limited synhroshuttle

 

 Noise level at operator's ear (at engine idle)

74 db

 

 Noise level at operator's ear (at full rpm)

89 db
 
Brakes

Power-assisted braking system with enclosed oil-immersed, self-adjusting, multi-plate disc service brakes. Single brake pedal.

Brake pedal effort: Maximum input force for service brakes 48 lb (22 kg) considerably lowered than a mechanical braking system.

Parking Brakes: Independent parking brake system, mechanical-operated, lever-applied, manually-adjusted caliper, mounted on transmission output shaft, disc diameter 279.4 mm (11 inches). Ratcheting brake lever with ergonomically-designed handle. Indicator light on dash indicates when parking brake is engaged.
Service Brakes: Oil immersed multi-plate disc brakes located on driveshaft inboard, positive retraction actuated by stepped hydraulic piston, 5-plates each side with nominal facing area of 19.5 in² each side (total surface area of 390 in²).
Axles
Front drive: ITL PD70 pad-mounted rigid planetary axle, Max Trac® four-pinion differential, gearing has specially-shaped spider gears providing torque proportioning. Positive retraction brakes.
Rear steer (standard 2WD): ITL S55 pin-mounted, oscillating axle with integrated reduction gear and sealed tapered roller bearings. Oscillation: 14°
Tires

Type: pneumatic
Drive Size: 15.5x25-10 ply (S60, S80, S100); 15.5x25-12 ply (S120)
Steer Size: 14 x 17.5-12 ply
 
Roller mast assembly
Sellick SEE-THRU© roller 2-stage or 3-stage masts are a stiff mast design with long-lasting wrap-around bracing. Designed with 6 rollers and 4 side-thrust rollers. Integral sideshifting carriage has internal hose reeving. Low maintenance.
Underclearance (std): 12 inches
Mast sideshift: 6 inches
Tilt forward: 45°; tilt rearward: 12°.
Mast mount
High performance maintenance-free mast mount composite bearings with Teflon© coating.
Self-cleaning seals prevent dirt from lodging between mount and shaft.
Large diameter mast mount shaft.
Hydraulic system
Closed hydraulic system powered by cast iron load sense hydraulic pump. Pump built into Perkins Model 1100 engine. Positive-pressure hydraulic tank ensures efficient functioning of pump.
Three psi relief in hydraulic tank ensures positive pressure preventing dirt and other inpurities from entering tank. Oil cleanliness ensured by suction strainer and 10 micron return filter.
Tank capacity: 21 Gal (79 L)
Hydraulic flow rate: 25 gpm @ 2400 rpm

Cylinders: Low maintenance, piston-type lift cylinders.
All lift cylinders have load check valves to decrease the rate of speed in case of an hose or other hydraulic failure.

 

BURKE HANDLING SYSTEMS

JACKSON, MISSISSIPPI

 

The Great State Of Mississippi