headline: JCB Teletruk

Lift capacity of 6,000 lbs to 13'

JCB Teletruk General Features
  • 3,500 lift capacity @ 78" forward reach for loading and unloading trucks from one side and reach over obstacles
  • Versatile telescopic boom design provides excellent forward visibility
  • Perkins 104-22, 2.2 litre, 4-cylinder 50 HP diesel engine or G.M. 3.0 litre, 63 HP LPG engine (available on 2WD units only)
  • 2-wheel or full-time 4-wheel drive
  • Hydrostatic transmission with special torque converter response
  • 111° carriage tilt—ideal for bucket use

JCB Teletruk lifting lumber
The newest addition to the Sellick product line is the versatile, JCB Teletruk. This rough terrain telescopic unit has a lift capacity of 6,000 lbs to 13'. But it’s the lift capacity of 3,500 lbs at 78" forward reach that conveniently allows the forklift to quickly unload (or load) flatbed trucks from one side. This means you save time and money.

Diagram of trailer

 
The JCB Teletruk features the Perkins 104-22, 2.2 litre, 4-cylinder 50 HP diesel engine coupled with a hydrostatic transmission with a special torque converter response. It will react to commands just like the transmissions you are used to working with. Or if you prefer...a General Motors 3.0 litre, 63 hp LPG engine is also available (on 2WD units only).

JCB Teletruk in close working quarters
With a turning radius of 98", an overall width of 50" and an overall height of 87", this compact variable-reach forklift is ideal for work in close quarters—indoor or outdoor.  
The JCB Teletruk is available in 2WD or full-time 4WD. For additional outstanding traction control on unimproved and rough surfaces, the JCB Teletruk also features a flow divider "diff-lock."  
The JCB Teletruk can be more than just a forklift. With our light material bucket attachment and the 111° carriage tilt, the unit becomes a small loader. With our Bagezee® hopper bucket system, the loading of aggregate is a quick one-machine, one-person operation. The JCB Teletruk’s quick disconnect system allows for easy changing of attachments.

JCB Teletruk with Bagezee attachment
These JCB Teletruks are supported by a network of long established Sellick material-handling dealers to offer prompt and personal service when you need it.  
Standard Equipment  
  • Perkins 104-22, 2.2 litre, 4-cylinder 50 HP diesel engine or G.M. 3.0 litre, 63 hp LPG engine (available on 2WD units only)
  • Flow divider "diff-lock" for traction control
  • Lighting kit includes two headlights, rotating beacon and one rear light
  • Hydrostatic transmission with special torque converter response
  • Hose burst check valves on tilt, lift and extension cylinder circuits
   
JCB Teletruk Dimensional Data & Technical Specifications
  TLT30 TLT30D 4x4
Lift capacity @ 24 inches

6,000 lbs
Lift height

13 ft/3.9 m
Carriage width

47"/1194 mm
Maximum width

50"/1270 mm

55"/1397 mm
Free lift (standard)

55.5"/1410 mm

61.4"/1560 mm
Height of overhead guard (std)

87"/2210 mm

90.5"/2299 mm
Height of overhead guard (low)

83"/2108 mm

86.6"/2200 mm
Height of operator's seat (std)

43"1092 mm

49"/1245 mm
Height of operator's seat (low)

42"/1067 mm

48"/1219 mm
Turning radius

98"/2489 mm

118"/2997 mm
Ground clearance

5"/127 mm

6.5"/165 mm

 
   

Customize your lift truck for your application
  • Quick disconnect system for easy attachment changes
  • Light material 0.65 cu yd bucket
  • 0.65 cu yd hopper/bucket Bagezee
  • Hang-on integral sideshift
  • Partial and full cabs
  • 36" or 49" loadbackrest
  • Upswept exhaust with optional catalytic converters
  • Strobe light
  • Additonal lighting kits